Treadmill Desk Repair, Maintenance & Care – Treadmill Desk Maintenance Tips

Since the treadmill desk is a mechanism that keeps moving the whole time, there are several problems that can occur with it. It is absolutely important to take the proper care of these machines if you need them to keep working for you for a long time. Here are some tips on treadmill desk maintenance that you can use.


1. First you must unplug the treadmill desk from the electrical socket. This is a very important step to begin with.


2. Begin by unscrewing the motor cover. This is held in place by means of screws. Depending on what make your treadmill desk is, there will be about two to eight screws.


3. Since this part of the treadmill is always present on the floor, it attracts the maximum amount of dust. If the dust accumulates in the motor of the machine, it will not be able to run properly. For that reason, you have to continuously remove the dust from the machine. You could do this most effectively by vacuum cleaning the motor area. If there is some more dust in corners that you cannot reach, you could clean this out by wiping the area with a damp rag. You must do this once a month at least, if your treadmill desk is in continuous operation.


4. The next step is to clean the grease fittings of the movable walking surface, if they have them. The cleaning of these fittings is done with a grease gun, which is easily available locally.


5. The chain needs to be kept regularly clean too. Only a few treadmill desks are driven by chains, check if yours is. You have to start by vacuuming and then wiping the chain so that all the dust from it is removed. Then, grease must be added to the chain. This keeps the chain functioning properly.






6. Another regular activity that you need to do when you are taking care of your treadmill desk is to check the movable belt often. This belt might get worn out and develop broken parts after a while. If the breaks are totally irreparable, then you might need to completely replace the chain with a new one got from a reputed treadmill desk store. Make sure the sizes are the same.


7. Your walking belt will last longer if you take adequate care to keep it well-maintained. From time to time, you must clean out the dust that tends to accumulate below the belt. You cannot easily reach at this dust because it will be pressed down by the belt itself. But if you check out the sides of the treadmill desk base, you will find some screws. Remove them. This will make the belt loose. You can then lift this belt and simply vacuum away the dust that collects beneath it. You could also use a damp cloth to clean it out more effectively.


8. One of the most used parts of the treadmill desk is the walking area, known as the deck. This area has to suffer a lot of pressure of the footfalls and hence it gets worn out easily. Check this area continually to make sure that it is still functional. Over time, it may develop some ruts or bumps which might make using the device quite dangerous. If that happens, you will need to change the walking deck. Sometimes, flipping the deck is possible. If you can do that, you will be prolonging the life of your treadmill desk.


9. Keep the treadmill desk’s walking area well-lubricated. Some treadmill desks can be lubricated with silicone gels or sprays – these will be recommended in the user manual. Lubricating the desk is quite simple. All you have to do is to lift the belt, clean the underside by vacuuming and wiping with a wet cloth and then apply the lubricant. The frequency with which this needs to be done will be mentioned on the manual of the treadmill desk.






10. With some treadmill desks, it will be recommended to use a special kind of lubricating wax. If this is what is needed, it will be provided with the treadmill desk and there will be specific instructions on how this needs to be used in the manual that comes along with the product.


11. Remember to align the deck properly with the belt and re-fix the screws properly so that the whole unit is once again secure. Basically you have to just repeat the steps in reverse order that you used when taking these components apart.


12. The belt has to be tightly affixed onto the desk. You need to check this before you use the treadmill again. This is very important to prevent accidents. Start the treadmill desk. Check the movement of the belt. Slowly increase the speed. If you see the belt sagging or lagging, the realignment is not done properly. You will have to stop the unit and do it correctly once again.